S Sonic
The Instromet S.Sonic Single Path Ultrasonic Flow Meter is a device ideally suited for a variety of gas measurement applications. Sophisticated transducers utilizing a unique bounce path configuration along with digital electronics gives the S.Sonic low uncertainty (± 1.0%) with excellent repeatability and linearity characteristics. The S.Sonic is recommended for non-custody applications. It is available in line sizes from 4" and all ANSI ratings. It can be configured for retractable and non-retractable transducers. The absence of moving parts makes it a very low maintenance meter. For optimal performance, the installation of a flow conditioning plate or system is recommended.
| Series IV Downloads | |||||
| Brochure | FC3 Downloads | Approvals |
Capacity:370 ACFH to 7,500,000 ACFH (160 - 210,000 am³/h)
Diameters:3" - 64"
Flange Ratings: ANSI 150# - ANSI 2500#
Flow Conditioning: 10D upstream, 5D downstream straight length required
Optional flow conditioning if used flow calibration
Output:Four pulse outs: 0 to 10,000 Hz; Modbus or ASCII RS 232/485
Operating Pressure:up to 6170 psi, 425 bar
Turn-Down Ratio:typically: 60:1, depending on diameter
Type: Spoolpiece meter body, Single Path
- Series IV Technical Release Download (pdf) 128 KB
- S.Sonic Ultrasonic Flow Meter Download (pdf) 197 KB
- FC3 Frequency Controller, Rev.C Download (pdf) 702 KB
- Adding FC3CO Dual Analog Output Download (pdf) 2,37 MB
- FC3CO Rev B2 Current Output Board Download (pdf) 867 KB
- FM Global Approval Download (pdf) 115 KB

